2 Flute End Mills
High quality 38mm long tungsten carbide End Mills with 30° helix and a shank diameter of 3.175mm. Ideal for accurate and depth-controlled rubout of copper when producing mechanically milled PCBs with a CNC / Rapid Prototyping Machine. All supplied with drill/router collars.
|Part Number||Cutter Diameter
Alternative diameters and tools with a 36mm overall length can be supplied on a non-stock basis.
Suitable for Ferrous and Non Ferrous milling and applications include: isolation milling of PCBs; Electronic Components; Fiberglass; Pocketing and Slotting Operations; Graphite Electrodes; Plastics for Optical and Medical and Engraving and Sign Making.
60° and 90° Tungsten carbide
36mm Long Tungsten Carbide Routers for fine Isolation Milling. The 60°C can go to 100 micron.
SC/FT Chip Breaker Routers
Tungsten Carbide printed circuit board routers with 1 / 8" (3.175mm) shank. The special geometry offers exceptional swarf removal, reduces radial load significantly and produces a very fine surface finish. Total length 38mm. Some popular sizes are offered below although other sizes from 0.8mm to 3.175mm are also available.
RP Series Routers
Tungsten Carbide routers with 1 / 8" (3.175mm) shank for plastics and large rub outs of copper laminates. Total length 38mm.
1/8th Drill Collar
Order the appropriate number of collars at the same time as your B Series drills or routers. These drill collars can be pre-fitted to any of the B series, MM drills or Routers all of which have a 1/8th (3.175mm shank). They should be used with any tool on a CNC machine.