1/8" Turbo Shank
High grade solid carbide PCB drills, available as B-series 1/8th inch turbo shank. Solid carbide drills remain sharp for much longer than steel drills when drilling epoxy glass PCB laminates such as Fotoboard and Microtrak and should be used at high speed to produce good quality holes and avoid breakage. These drill bits can be fitted with drill collars for use with CNC drills.
MM Reground Carbide Drills
High quality pre-used tungsten carbide drill bits which have been reground to be as sharp as new. A consider-able saving on new bit prices. All are 'type B' with 1/8" (3.175mm) shank. Supplied in packs of 10.
SC/FT Chip Breaker Routers
Tungsten Carbide printed circuit board routers with 1 / 8" (3.175mm) shank. The special geometry offers exceptional swarf removal, reduces radial load significantly and produces a very fine surface finish. Total length 38mm. Some popular sizes are offered below although other sizes from 0.8mm to 3.175mm are also available.
RP Series Routers
Tungsten Carbide routers with 1 / 8" (3.175mm) shank for plastics and large rub outs of copper laminates. Total length 38mm.
1/8th Drill Collar
Order the appropriate number of collars at the same time as your B Series drills or routers. These drill collars can be pre-fitted to any of the B series, MM drills or Routers all of which have a 1/8th (3.175mm shank). They should be used with any tool on a CNC machine.